Name : Centrifuge Basket
Function : Remove water and coal slime
Type :STMNVM1100-T1
Component /Materials /size /Description
1.Discharge Flange : Q345B/OD 1158mm /ID 1080mm / T25mm / “X“one butt weld
2.Drive Flange : Q345B / OD 780mm /715 ID mm / T20mm / “X“one butt weld
3.Screen : Wedge wire / SS 340 / PW#120/Gaps 0.5mm/Spot welded onto# SR250 rod of 25mm centres/4pieces
4.Wear cone : SS304 T12x65
5.Highness : 710 mm
6.Half Angle : 13°
7.Stiffened vertical flat bar : Q235B /12PCS/ T6mm
8.Stiffened rings : Q235B /3pcs/ SQ12
9.Discharge flange slinger ring : Q235/1PEC/T4X6
10.Discharge lip: None
11.Turbo bars (Out side) : None
12.Accelerators & Anticlockwise rotations (inside): SS304/8PEC SP12x150 /8PEC SP12X130
13.Dynamic balance level : G6.3standard(Refer ISO1940-1:2003)
14.Paint : Antirust paint /Red （ex.screens）
15.Pack : pallet/ crate( ≤3 PCS) /stocker（≥3PCS）

Name : Centrifuge Basket
Function : Remove water and coal slime
Type :STMNVM1100-T2
Component /Materials /size /Description
1.Discharge Flange : Q345B/OD 1145mm /ID 1080mm / T25mm / “X“one butt weld
2.Drive Flange : Q345B / OD 780mm /715 ID mm / T20mm / “X“one butt weld
3.Screen : Wedge wire / SS 340 / PW#122/Gaps 0.7mm/Spot welded onto# SR250 rod of 25mm centres/4pieces
4.Wear cone : SS304 T12
5.Highness : 710 mm
6.Half Angle : 13°
7.Stiffened vertical flat bar : Q235B /12PCS/ T6mm
8.Stiffened rings : Q235B /3pcs/ SQ12
9.Discharge flange slinger ring : Q235/1PEC/T4X6
10.Discharge lip: None
11.Turbo bars (Outside) : None
12.Accelerators & Anticlockwise rotations (inside): SS304/2PCS/ ”T“shaped
13.Dynamic balance level : G6.3standard(Refer ISO1940-1:2003)
14.Paint : Antirust paint /Red （ex.screens）
15.Pack : pallet/ crate( ≤3 PCS) /stocker（≥3PCS）

Name : Centrifuge Basket
Function : Remove water and coal slime
Type :STMNVM1100-T3
Component /Materials /size /Description
1. Discharge Flange : Q345B/OD 1145mm /ID 1080mm / T25mm / “X“one butt weld
2. Drive Flange : Q345B / OD 780mm /715 ID mm / T20mm / “X“one butt weld 3. Screen : Wedge wire / SS 340 / PW#122/Gaps 0.7mm/Spot welded onto# SR250 rod of 25mm centres/4pieces
4.Wear cone : None
5.Highness : 710 mm
6.Half Angle : 13°
7.Stiffened vertical flat bar : Q235B /12PCS/ T6mm
8.Stiffened rings : Q235B /3pcs/ SQ12
9.Discharge flange slinger ring : Q235/1PEC/T4X6
10.Discharge lip: None
11.Turbo bars (Out side) : None
12.Accelerators & Anticlockwise rotations (inside): SS304/8 PCS/ ”T“shaped
13.Dynamic balance level : G6.3standard(Refer ISO1940-1:2003)
14.Paint : Antirust paint /Red （ex.screens）
15.Pack : pallet/ crate( ≤3 PCS) /stocker（≥3PCS）